Dongguan Quality Control Technology Co., Ltd.
We Make Quality Control Easy!
Add to Cart
Programmable Constant Temperature Humidity Environmental Climate Test Equipment
Brief Introduction:
Temperature humidity test chamber is use to test material heat, cold, dry resistance, humidity resistance.
Suitable for electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
Model Selection:
| Model | iXB-OTS-150 | iXB-OTS-225 | iXB-OTS-408 | iXB-OTS-800 | iXB-OTS-1000 |
| Inner size WHD (cm) |
50*60*50 | 60*75*50 | 80*85*60 | 100*100*80 |
100*100 *100 |
| External size WHD (cm) |
70*162.5 *153 |
80*177.5 *153 |
100*192.5 *163 |
120*209 *183 |
120*209 *203 |
| Window Size WH (mm) |
500*600 | 600*750 | 800*850 | 100*100 | 100*100 |
| Test Hole Size Diameter(mm) |
2 holes 50mm of each |
2 holes 100mm of each |
2 holes 100mm of each |
2 holes 100mm of each |
2 holes 100mm of each |
| Weight | 320KG | 370KG | 460KG | 560KG | 590KG |
Technical Specifications:
| Voltage | 1Ø 220V 50Hz/ 3Ø 380V 60Hz/Customized |
| Temperature range | -70℃ ～180℃ |
| Humidity range | 10% ～98%RH (5%~98% R.H. customized) |
| Temp.& humidity control fluctuation | ≤±0.5℃, ≤ ±2.5%RH |
| Indication resolution | 0.01℃, 0.1 %RH |
| Temp.&humidity Uniformity | ≤±1.5℃,≤±2.5% RH |
| Heating &Cooling time | ≤5℃/min for heating; ≤ 1.2℃/min for cooling |
| Cooling type | Air cold |
| Chamber materials | SUS#304 stainless steel for Inner chamber with thickness 1.5mm Steel plate for external chamber with thickness 1.5mm |
| Insulation materials | Rigid polyurethane foam + ultrafine glass fiber with thickness of 100mm |
|
|
Refrigerating unit, water supply and drainage device, blower fan, power distributing Cabinet; Humidifying and humidity measuring water utilization control device |
|
|
Heat emission blower fan Distribution switchboard Test terminal of sample USB physical interface (need to be purchased together with centralized monitoring software) Residual current circuit breaker of main power supply |
|
|
Basin heating humidifying method Stainless steel armored heater is adopted in basin humidification Control mode of heater: non contact equal period pulse-width modulation, SSR (solid state relay) Water level control device, dry heating prevention device of heater |
| Humidifier | 1.Basin heating humidifying method 2.Control mode of heater: non contact equal period pulse-width modulation, SSR (solid state relay) 3.Water level control device, dry heating prevention device of heater |
|
|
Temperature (humidity) control display, over temperature protection setting device,emergency switch, run indicator, failure indicator |
|
|
Imported Compressor Fits wide range of pressure Higher heating efficiency Easy to maintain |
|
|
1.Unique design of the box within the wind circulation structure, to ensure that under the conditions of the test with the case of |