Dongguan Quality Control Technology Co., Ltd.
We Make Quality Control Easy!
Add to Cart
Foaming rubber and plastic Flat vulcanizing Heating press equipment for pressing and moulding
Brief Introduction:
The iqualitrol of flat vulcanizing presses are used as the main equipment for pressing and moulding all kinds of rubber model products and non-model products, and can also be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.
It has independent power mechanism and electrical system, and is controlled centrally by push button. The working pressure and heating temperature can be adjusted within a certain range. The machine is divided into two types: manual and semi-automatic.
Model Selection:
| iCREE-6014A-05 | iCREE-6014A-1 | iCREE-6014A-2 |
| Pressure 500kg/0.5KN | 1000kg/10KN | 2000kg/20KN |
Technical Specifications:
| Pressure gauges | Manual pressure adjustable, barometer adjustment accuracy 5% [pressure = pressure / sample area]. |
| Platen size (mm metric) | 200*200, 250*250, 300*300, 350*350, 400*400, 500*500, 600*600mm. |
| Hot pressed plate material | High temperature resistant imported steel plate, surface carbonized and quenched, special treatment for fast heat conduction, parallel pressure without changing shape, wear-resistant. |
| Press plate hardness | 50 to 60 HRC |
| Flatness of the press plate | ≤0.03mm |
| Flatness and parallelism of the press plate | ≤0.16mm |
| Temperature range | Normal temperature - 250°C [Customizable up to 500°C] [Choose one subject to quotation] |
| Temperature uniformity | 1.5°C [the larger the platen the higher the temperature the worse the temperature uniformity] |
| Temperature controller | Precision module with Omron digital value display. |
| Temperature control method | PID precise control, self-tuning with high precision sensors, temperature control accuracy: ±1.0°C. |
| Timer | LED digital setting display, time range 0.1S to 99min to 9.9hr |
| Heaters | Heating mould built-in cylindrical type [according to the pressure plate area configuration of different power packaging pressure plate temperature uniformity, not the same power] |
| Heating up time | Approx. 15 min at room temperature to 160°C |
| Two hot plates | The hot plate can be set to control the temperature separately |
| Heating method | Electric heating |
| Cooling methods | Natural air cooling |
| Pneumatic systems | Q1 pneumatic control system, air driven piston with high precision cylinder without resistance for smooth lifting and lowering; manual pressurization, pressure-holding and unpressurization. |
| Cylinder stroke | Max 120mm |
| Cylinder speed | 11mm/s |
| Pressure table |
0 to 100kg/sq.cm [actual pressure configuration appropriate range]. |
| Moulding method | Manual rise and fall |
| Safety devices | Safety guards, safety gates. [Optional quotation applies] |
| Number of safety devices | 3 |
| Matching moulding frame [optional | Bespoke |
| Supply voltage | 3∮, AC220V |
| Gas source | 0.5-0.7mpa |
| Caster | None |