UNIPOL-820 Double Disc Precision Metallographic Polishing Machine with Speed 50-600rpm

Double Disc Precision Metallographic Grinding and Polishing Machine with Speed 50-600rpm

Brief Introduction:

iqualitrol UNIPOL-820 metallographic grinding and polishing machine is mainly used for grinding and polishing metal materials. This machine can be equipped with a pressure ring or a magnetic adsorption method to place sandpaper and polishing pad, and the work operation is more stable.

The magnetic adsorption is mainly to overcome the shortcomings of the traditional card-polishing fabric pleating. The polishing fabric with the pressure-sensitive adhesive is attached to the polishing film and then adsorbed on the magnetic sheet. Secondly, the replacement of the sandpaper and the polishing pad is more convenient.

Technical Specifications:

1, Power supply: 110V/220V;

2, Power Consumption: 350W;

3, grinding and polishing disc: Double disc, diameter Φ203mm;

4, the number of revolutions: 50rpm-600rpm;

Product weight and dimension: Size: 720mm × 530mm × 350mm; Weight: 46kg

Grinding and polishing consumables:

Sandpaper, super fine water sandpaper, polishing flannel, polishing powder, polishing agent, abrasive paste

Applications of iqualitrol UNIPOL-820:

UNIPOL-820 is a heavy-duty grinding / polishing machine with two 8" lapping plates and independent speed control. Upgraded magnetic plates were installed in the machine, which makes installing sandpaper/polishing pad quickly and easily. UNIPOL-820 is perfect for use in a metallographic lab to prepare small samples faster and easier.

Installation condition: This equipment is required to be used at an altitude of 1000m or less, a temperature of 25 °C ± 15 °C, and a humidity of 55% Rh ± 10% Rh.

1. Water: The equipment is equipped with a water inlet and a drain. Customers need to connect tap water to cool and drain the drain.

2, electricity: AC220V; 50Hz, there must be a good base.

3, gas: no.

4, workbench: size 800mm (L) * 600mm (W) * 700mm (H), bearing more than 200kgs.

5. Ventilation: No.

Main Features:

1, precision rotation, low noise.

2, double disc structure, more convenient to use.

3. Digital display speed.

4, can be equipped with automatic drip or circulation pump.

Specification of the heavy-duty metallographic grinding / polishing machine with two 8" lapping plates: